| |
Search found 297 matches |
Author | Message |
---|---|
![]() |
|
John Ballard Replies: 3 Views: 2573 |
![]() |
I think we have 16 from MMCCNSW we will be driving down over 6 days starting at Junee,
I need to rebuild my motor and just got the bored block back today. But I have got a spare Ute. |
|
![]() |
|
John Ballard Replies: 0 Views: 1784 |
![]() |
Hi all there is a group from MMCC NSW going to the Rally next year and we have organized the trip over a few days we will meet at Junee stay the night then on to Echuca where we will stay two nights ... | |
![]() |
|
John Ballard Replies: 3 Views: 2332 |
![]() |
Booked our accommodation today we will be travelling as a Club from NSW with a few stops on the way Probably Junee. Narrandera, Mildura etc. Now I have a year to decide which vehicle to take. | |
![]() |
|
John Ballard Replies: 3 Views: 3785 |
![]() |
After leaving my lights on and having a flat battery I installed a buzzer years ago.
My method was an N/C relay fitted with the coil in it driven by the ignition wire, then a cable from the on side o ... |
|
![]() |
|
John Ballard Replies: 4 Views: 3240 |
![]() |
Don't you move the radiator away from the motor not towards. | |
![]() |
|
John Ballard Replies: 0 Views: 2203 |
![]() |
Put the battery charger on the car night before a run to the famous Gnoo Blas Classic in Orange NSW 650 cars on show this year.
It is approx 160klms from home so we left earlyand all went well but l ... |
|
![]() |
|
John Ballard Replies: 11 Views: 4919 |
![]() |
Good straight run though, BP Turbo will do it in one day | |
![]() |
|
John Ballard Replies: 8 Views: 4453 |
![]() |
I have a Commercial Workshop Manual with diagrams at home (away now) . For my Ute rebuilt I bought a car harness and added the blinkers and other myself.
Originally they had a relay mounted on the i ... |
|
![]() |
|
John Ballard Replies: 11 Views: 4919 |
![]() |
I can see a BBQ stop coming up in Dubbo ![]() ![]() ![]() ![]() ![]() ![]() |
|
![]() |
|
John Ballard Replies: 1 Views: 4436 |
![]() |
Got my 1098 parts dipstick and gearstick from rgplant@minorpartsofoxford.com.uk Richard Plant very helpful posted quick well worth a try if you cannot get it here.
Also mirabella classic cars on lin ... |
|
![]() |
|
John Ballard Replies: 1 Views: 4436 |
![]() |
Anyone have a dipstick for a 1098 engine my new motor is without one and they are different to the 948 ones
Thanks |
|
![]() |
|
John Ballard Replies: 5 Views: 3770 |
![]() |
There are others making harnesses but they are expensive, For my Ute I bought a cheap one from ESM in UK think it was for a 1958 2 door. From there I modified and added what I needed hiding where I c ... | |
![]() |
|
John Ballard Replies: 0 Views: 2533 |
![]() |
Grabbed an opportunity to take my car for a run yesterday but alas heavy rain started and wipers would not work.
Once home checked the electrics which differ from original as I have fitted a relay a ... |
|
![]() |
|
John Ballard Replies: 14 Views: 7640 |
![]() |
Firstly can I suggest you acquire a multimeter about $20 on line or places Like Jaycar etc.
I fitted my relay under dash and from there connected a cable to good paint free metal from terminal 30 . ... |
|
![]() |
|
John Ballard Replies: 14 Views: 7640 |
![]() |
I had some problems with my single speed wipers would not get a full sweep took one arm off wet the screen worked ok. Next I checked the voltage at the motor running and found 11 volts, diagram will s ... | |
![]() |
|
John Ballard Replies: 5 Views: 3390 |
![]() |
So to add these lights you need a relay and a blocking diode I used one I had about 3 or 4 amps. IN5404
The relay is connected to terminal 86 from the load side of ignition switch and terminal 85 to ... |
|
![]() |
|
John Ballard Replies: 5 Views: 3390 |
![]() |
I will finish drawing it up tomorrow see if I can post it | |
![]() |
|
John Ballard Replies: 5 Views: 3390 |
![]() |
When I built my Ute last year I found my headlights had parkers lamps inside,as they were not needed with my series 5 combination flasher/side lights I made them daytime lights by a connection to ign ... | |
![]() |
|
John Ballard Replies: 6 Views: 3670 |
![]() |
Ok bit confused here if it only has a wire it is electric. Perhaps this “ copper” wire is actually a tube , does it have a plastic cover over the copper | |
![]() |
|
John Ballard Replies: 6 Views: 3670 |
![]() |
If it is not an electric it has a capillary tube that takes the temperature to the gauge . It it has a leak the gas comes out of the tube, don’t think that can be fixed.
The wire would be for the li ... |
|
![]() |
|
John Ballard Replies: 6 Views: 3670 |
![]() |
If it is an electric one could be the senser in the head. Not expensive to get a good one repaired.
Sould have two connections one is power in the other wire to the sensor |
|
![]() |
|
John Ballard Replies: 7 Views: 4496 |
![]() |
You can adjust the voltage regulator by following instructions in the manual . But first check your connections on the generator are clean and tight | |
![]() |
|
John Ballard Replies: 7 Views: 4496 |
![]() |
Generator light on means it is not charging . Sooner or later your battery will go flat. | |
![]() |
|
John Ballard Replies: 4 Views: 7820 |
![]() |
We cannot let another year go by without a proper National Rally a Combined Club event is what we need. Each Club could assume responsibility for section like show, dinner, rally etc | |
![]() |
|
John Ballard Replies: 5 Views: 6015 |
![]() |
Results from the Auto Elec was the slip rings were worn out. They could repair for $250 providing they could find parts a Lucas 17ACR. or new one for $300.
Managed to get a new one 45 amp rated from ... |
|
All times are GMT + 10 Hours |