Search found 256 matches

Why remove the glovebox? Don't you have a screw access hole in the side of the liner?

The LED is only allowing current to go one way as it's a diode.
A normal globe will allow the current to go back to the alternator to get the exciter going. You're managing to get it going with revs ...

Sort the speedo calibration after you've finished everything else:
You might find you want a higher diff ratio after an engine rebuild/replacement and a change in tyre size will also affect the speed ...

Almost certainly it will need calibration. Compare the numbers on the speedo face with your original.
Some of the Minor types are recorded here: https://morrisminornsw.org.au/wp-content/uploads/2019/ ...

Bypass the dipper switch & see what happens.

You should have 2 lights behind the 'waterfall' grille, one for high beam (usually red), the other to illuminate the ignition key (green).
From new, there was only one switch under the dash, for the ...

The Morris Minor Car Club of NSW will be having around a dozen cars on display tomorrow (Thurs 29th August) at Campbelltown Bunnings.
We did this last year & the turnout was great with lots of pe ...

Only later Minors had the provision for the switch, around 1960 onwards will have the threaded holes.

SNT 6211/12S is a MPH speedo from a Triumph/MG (claimed). Maybe the 13S designation is for the KPH version.

**There's a 13S face on eBay:
https://www.ebay.ie/itm/Speedometer-Dial-Face-Plate-200KPH ...

I'm running a Marina wiper motor with matching wheelboxes on my van which has 3 parallel wipers.

I'm not sure the commercials ever had trafficators fitted from the factory. I know the 1000s had a control box to activate the brake lights as indicators at the same time the sedans were still using t ...

What a great video!

It was good to see you down for All British Day. It was a pity that the Rally was on the same weekend but I managed to combine both fortunately. It's been quite a few years since the old sidevalve did ...

Thanks, this is the first indication of what's being planned for the weekend. The NSW club doesn't have another general meeting until April & even if an email was sent out to the members (not all ...

The alternator exciter circuit needs a 12v feed for it to kick in. You'll find it will self excite if you give the engine a rev.
The LED is a diode which only allows current to flow one way, in your ...

How about a thermostat housing with the sensor casting?

I realise this one might be the wrong angle but you get the idea:
http://minisport.com.au/images/12a408_1.jpg

Just use it as a junction box like how the later regulators are done.
It just looks complicated due to the fuses built in but the main alternator wiring bypasses that part anyway then you can just u ...

found the glass had separated from the reflector, so some good glue and back in it went.Might be a good time to fit some H4 lights.
Or even some of those bling LED units!! Very Happy

No replies so I guess everyone else is confused too.

I've only come across the rubber gasket between the bowl & the body. I've not noticed a gasket anywhere else nor have I ever needed one.

Trafficators would originally have been fitted low on the 2 door/convertibles. If there's no aperture behind the door, and you're not planning on fitting them, go for the later wiring loom.
I think ...

There's a lot of speedo info here:
http://potteries.mmoc.org.uk/ID/Speedo.htm

'1500' is from a 1000 sedan,
'1504' is from a 1000 traveller.
I'm not sure why the TPM varies though but it's only m ...

Wouldn't your car be a '56 if it had an 803cc and a central speedo?Series II with the centre speedo was released in late '54. The 1000 came about in late '56.
99% of late SIIs here are '55/'56.

The joys of being an 18 year old with an 1958 car, I don't have much a clue what stuff is supposed to look like without being taught/googling it ahahaI started off much the same, except I was a 17yo w ...

He he, well done with such an easy fix!!
You can do the same thing with the earlier cars with the fuses in the regulator box. Remove the reg box clip & it fits neatly across the fuses.
It makes ...

My first thought is that the ignition switch has fallen apart inside & is permanently 'on' but because the Morry only has 2 fuses, one for ign only & one fully live, it's possible that there's ...

Author	Message
Topic: Ignition light
Scouse Replies: 5 Views: 7257	Forum: Electrics, Instrumentation & Security Posted: Thu Oct 01, 2020 11:17 pm Subject: Ignition light
Scouse Replies: 5 Views: 7257	Why remove the glovebox? Don't you have a screw access hole in the side of the liner?
Topic: Ignition light
Scouse Replies: 5 Views: 7257	Forum: Electrics, Instrumentation & Security Posted: Thu Oct 01, 2020 8:36 pm Subject: Ignition light
Scouse Replies: 5 Views: 7257	The LED is only allowing current to go one way as it's a diode. A normal globe will allow the current to go back to the alternator to get the exciter going. You're managing to get it going with revs ...
Topic: Speedo ?
Scouse Replies: 7 Views: 8899	Forum: Electrics, Instrumentation & Security Posted: Wed Jul 08, 2020 8:26 am Subject: Speedo ?
Scouse Replies: 7 Views: 8899	Sort the speedo calibration after you've finished everything else: You might find you want a higher diff ratio after an engine rebuild/replacement and a change in tyre size will also affect the speed ...
Topic: Speedo ?
Scouse Replies: 7 Views: 8899	Forum: Electrics, Instrumentation & Security Posted: Sat Jul 04, 2020 8:58 am Subject: Speedo ?
Scouse Replies: 7 Views: 8899	Almost certainly it will need calibration. Compare the numbers on the speedo face with your original. Some of the Minor types are recorded here: https://morrisminornsw.org.au/wp-content/uploads/2019/ ...
Topic: High Beam problem
Scouse Replies: 8 Views: 9311	Forum: Electrics, Instrumentation & Security Posted: Sat Mar 21, 2020 1:16 pm Subject: High Beam problem
Scouse Replies: 8 Views: 9311	Bypass the dipper switch & see what happens.
Topic: SII dash workshop section
Scouse Replies: 6 Views: 6604	Forum: Electrics, Instrumentation & Security Posted: Wed Sep 04, 2019 4:56 pm Subject: SII dash workshop section
Scouse Replies: 6 Views: 6604	You should have 2 lights behind the 'waterfall' grille, one for high beam (usually red), the other to illuminate the ignition key (green). From new, there was only one switch under the dash, for the ...
Topic: NSW - Campbelltown Bunnings Father's Day Family Night
Scouse Replies: 0 Views: 5268	Forum: Club Events Posted: Wed Aug 28, 2019 12:34 pm Subject: NSW - Campbelltown Bunnings Father's Day Family Night
Scouse Replies: 0 Views: 5268	The Morris Minor Car Club of NSW will be having around a dozen cars on display tomorrow (Thurs 29th August) at Campbelltown Bunnings. We did this last year & the turnout was great with lots of pe ...
Topic: interior light
Scouse Replies: 9 Views: 8886	Forum: Electrics, Instrumentation & Security Posted: Wed Jul 10, 2019 5:31 pm Subject: interior light
Scouse Replies: 9 Views: 8886	Only later Minors had the provision for the switch, around 1960 onwards will have the threaded holes.
Topic: Speedo's ~ smiths
Scouse Replies: 5 Views: 6910	Forum: Electrics, Instrumentation & Security Posted: Fri Jul 05, 2019 7:24 pm Subject: Speedo's ~ smiths
Scouse Replies: 5 Views: 6910	SNT 6211/12S is a MPH speedo from a Triumph/MG (claimed). Maybe the 13S designation is for the KPH version. **There's a 13S face on eBay: https://www.ebay.ie/itm/Speedometer-Dial-Face-Plate-200KPH ...
Topic: 2 speed wipers
Scouse Replies: 9 Views: 8495	Forum: Electrics, Instrumentation & Security Posted: Sun Apr 21, 2019 1:59 pm Subject: 2 speed wipers
Scouse Replies: 9 Views: 8495	I'm running a Marina wiper motor with matching wheelboxes on my van which has 3 parallel wipers.
Topic: Tafficators in a 54/55 Pickup?
Scouse Replies: 4 Views: 5990	Forum: Electrics, Instrumentation & Security Posted: Sat Jan 05, 2019 6:40 pm Subject: Tafficators in a 54/55 Pickup?
Scouse Replies: 4 Views: 5990	I'm not sure the commercials ever had trafficators fitted from the factory. I know the 1000s had a control box to activate the brake lights as indicators at the same time the sedans were still using t ...
Topic: Australian Morris Minor Car Clubs' 19th National Rally
Scouse Replies: 18 Views: 39231	Forum: National Rally ~ Canberra region 2018 Posted: Thu Sep 27, 2018 8:56 pm Subject: Australian Morris Minor Car Clubs' 19th National Rally
Scouse Replies: 18 Views: 39231	What a great video!
Topic: All British Day Sydney
Scouse Replies: 1 Views: 5833	Forum: Club Events Posted: Tue Sep 25, 2018 5:02 pm Subject: All British Day Sydney
Scouse Replies: 1 Views: 5833	It was good to see you down for All British Day. It was a pity that the Rally was on the same weekend but I managed to combine both fortunately. It's been quite a few years since the old sidevalve did ...
Topic: Nationals Notifications
Scouse Replies: 8 Views: 14548	Forum: National Rally ~ Canberra region 2018 Posted: Sat Mar 03, 2018 10:44 am Subject: Nationals Notifications
Scouse Replies: 8 Views: 14548	Thanks, this is the first indication of what's being planned for the weekend. The NSW club doesn't have another general meeting until April & even if an email was sent out to the members (not all ...
Topic: Alternator ignition light not going out
Scouse Replies: 1 Views: 4956	Forum: Electrics, Instrumentation & Security Posted: Fri Feb 09, 2018 6:25 am Subject: Alternator ignition light not going out
Scouse Replies: 1 Views: 4956	The alternator exciter circuit needs a 12v feed for it to kick in. You'll find it will self excite if you give the engine a rev. The LED is a diode which only allows current to flow one way, in your ...
Topic: Temperature gauge
Scouse Replies: 3 Views: 7496	Forum: Electrics, Instrumentation & Security Posted: Tue May 09, 2017 5:18 pm Subject: Temperature gauge
Scouse Replies: 3 Views: 7496	How about a thermostat housing with the sensor casting? I realise this one might be the wrong angle but you get the idea: http://minisport.com.au/images/12a408_1.jpg
Topic: Rf 95 control box
Scouse Replies: 2 Views: 5024	Forum: Electrics, Instrumentation & Security Posted: Thu Apr 13, 2017 4:43 pm Subject: Rf 95 control box
Scouse Replies: 2 Views: 5024	Just use it as a junction box like how the later regulators are done. It just looks complicated due to the fuses built in but the main alternator wiring bypasses that part anyway then you can just u ...
Topic: Headlights
Scouse Replies: 4 Views: 5528	Forum: Electrics, Instrumentation & Security Posted: Wed Apr 05, 2017 1:59 pm Subject: Headlights
Scouse Replies: 4 Views: 5528	found the glass had separated from the reflector, so some good glue and back in it went.Might be a good time to fit some H4 lights. Or even some of those bling LED units!!
Topic: Headlights
Scouse Replies: 4 Views: 5528	Forum: Electrics, Instrumentation & Security Posted: Wed Apr 05, 2017 7:17 am Subject: Headlights
Scouse Replies: 4 Views: 5528	No replies so I guess everyone else is confused too. I've only come across the rubber gasket between the bowl & the body. I've not noticed a gasket anywhere else nor have I ever needed one.
Topic: 58 M1000 loom chioce confusion
Scouse Replies: 3 Views: 5680	Forum: Electrics, Instrumentation & Security Posted: Mon Mar 27, 2017 6:12 pm Subject: 58 M1000 loom chioce confusion
Scouse Replies: 3 Views: 5680	Trafficators would originally have been fitted low on the 2 door/convertibles. If there's no aperture behind the door, and you're not planning on fitting them, go for the later wiring loom. I think ...
Topic: Speedo
Scouse Replies: 19 Views: 18582	Forum: Electrics, Instrumentation & Security Posted: Mon Mar 20, 2017 5:31 pm Subject: Speedo
Scouse Replies: 19 Views: 18582	There's a lot of speedo info here: http://potteries.mmoc.org.uk/ID/Speedo.htm '1500' is from a 1000 sedan, '1504' is from a 1000 traveller. I'm not sure why the TPM varies though but it's only m ...
Topic: Speedo
Scouse Replies: 19 Views: 18582	Forum: Electrics, Instrumentation & Security Posted: Mon Mar 20, 2017 5:28 pm Subject: Speedo
Scouse Replies: 19 Views: 18582	Wouldn't your car be a '56 if it had an 803cc and a central speedo?Series II with the centre speedo was released in late '54. The 1000 came about in late '56. 99% of late SIIs here are '55/'56.
Topic: Minor has decided it wants to be a full time Christmas tree
Scouse Replies: 10 Views: 12091	Forum: Electrics, Instrumentation & Security Posted: Tue Dec 06, 2016 9:56 pm Subject: Minor has decided it wants to be a full time Christmas tree
Scouse Replies: 10 Views: 12091	The joys of being an 18 year old with an 1958 car, I don't have much a clue what stuff is supposed to look like without being taught/googling it ahahaI started off much the same, except I was a 17yo w ...
Topic: Minor has decided it wants to be a full time Christmas tree
Scouse Replies: 10 Views: 12091	Forum: Electrics, Instrumentation & Security Posted: Tue Dec 06, 2016 9:54 pm Subject: Minor has decided it wants to be a full time Christmas tree
Scouse Replies: 10 Views: 12091	He he, well done with such an easy fix!! You can do the same thing with the earlier cars with the fuses in the regulator box. Remove the reg box clip & it fits neatly across the fuses. It makes ...
Topic: Minor has decided it wants to be a full time Christmas tree
Scouse Replies: 10 Views: 12091	Forum: Electrics, Instrumentation & Security Posted: Tue Dec 06, 2016 3:38 pm Subject: Minor has decided it wants to be a full time Christmas tree
Scouse Replies: 10 Views: 12091	My first thought is that the ignition switch has fallen apart inside & is permanently 'on' but because the Morry only has 2 fuses, one for ign only & one fully live, it's possible that there's ...