View previous topic :: View next topic |
Author |
Message |
graham At rest
Joined: 06 Dec 2008 Posts: 744 Location: Wanguri NT
|
|
Back to top |
|
bigcarle Full Licence
Joined: 07 Nov 2007 Posts: 578 Location: lota, brisbane bayside
|
Posted: Tue Dec 22, 2009 6:58 am Post subject: |
|
|
4 wires go to the wiper motor plug
green........................power from the fuse
brown/lt green...........from the switch
red/lt green...............from the switch
blue/lt green..............from the switch
and of course a black wire to the body for earth
|
|
Back to top |
|
graham At rest
Joined: 06 Dec 2008 Posts: 744 Location: Wanguri NT
|
|
Back to top |
|
libbor Banned for bullying.
Joined: 01 Feb 2009 Posts: 1341 Location: Ghoulbon
|
Posted: Tue Dec 22, 2009 9:03 am Post subject: |
|
|
Got to be very careful graham. How many wires has the wiper motor got?
you will have to wire a relay for the park system to work if it is a five pin.
What is the part no on the motor.
It is really easy to burn the park circuit out if you make a mistake
|
|
Back to top |
|
graham At rest
Joined: 06 Dec 2008 Posts: 744 Location: Wanguri NT
|
|
Back to top |
|
libbor Banned for bullying.
Joined: 01 Feb 2009 Posts: 1341 Location: Ghoulbon
|
Posted: Tue Dec 22, 2009 10:54 am Post subject: |
|
|
Sorry Graham,
I cant help. The only ones that I know what to do with are the 5 pin ones
Cheers
Darren
|
|
Back to top |
|
John Ballard valued contributor
Joined: 11 Feb 2004 Posts: 2646 Location: Dubbo NSW
|
Posted: Tue Dec 22, 2009 2:21 pm Post subject: |
|
|
Are you sure, two speed normally have five pins four the same way
( same plane) and one accross the bottom .
The wiring incorporates parking modes in both high and low speed.
|
|
Back to top |
|
graham At rest
Joined: 06 Dec 2008 Posts: 744 Location: Wanguri NT
|
Posted: Tue Dec 22, 2009 4:03 pm Post subject: |
|
|
No John I am not sure, I was under the impression it had four but I could easily be wrong. I will check tomorrow when I am at the car.
If it is a five pin which pin dose what?
Cheers
Graham
|
|
Back to top |
|
bigcarle Full Licence
Joined: 07 Nov 2007 Posts: 578 Location: lota, brisbane bayside
|
Posted: Wed Dec 23, 2009 6:44 am Post subject: |
|
|
if it is a marina wiper motor they only have 4 pins with the earth attached to the motor elsewhere, and the mini sigle speed is the same motor but with 3 pins
i will try to look at my marina's wiper and find out where the wires go
|
|
Back to top |
|
DON58VAN Full Licence
Joined: 25 Sep 2008 Posts: 863 Location: Sydney/Bowral
|
Posted: Thu Dec 24, 2009 5:59 pm Post subject: |
|
|
Hi Graham
I hope that Santa will bring you a completed and very satisfying MorRex.
This is probably not much help, but I know that Owen Burton's modification manual (I don't have a copy) has instructions on how to do the 2-speed wiper mod. Presumably, that would include how to wire it up.
Cheers and all the best for 2010
Don
|
|
Back to top |
|
bigcarle Full Licence
Joined: 07 Nov 2007 Posts: 578 Location: lota, brisbane bayside
|
|
Back to top |
|
redback valued contributor
Joined: 06 Jun 2004 Posts: 389 Location: Hervey Bay
|
|
Back to top |
|
graham At rest
Joined: 06 Dec 2008 Posts: 744 Location: Wanguri NT
|
|
Back to top |
|
|