Morris Minor ShopMorris Down Under Forum Forum Index Classic Car Trader
Log in Register FAQ Memberlist Search Morris Down Under Forum Forum Index

SII dash workshop section

 
Post new topic   Reply to topic    Morris Down Under Forum Forum Index » Electrics, Instrumentation & Security
View previous topic :: View next topic  
Author Message
WJC56
Got the keys


Joined: 22 May 2018
Posts: 38
Location: Burrum Heads, Qld

PostPosted: Tue Sep 03, 2019 3:24 pm    Post subject: SII dash workshop section Reply with quote

Hello. Can anyone help me with a copy of the workshop manual section that covers the dash for a Series II (1954) please. My LCV workshop manual appears to have nothing on this any while I dont need it for complete disassembly, I will certainly need it for putting humpty back together in due course. Many thanks, Bill at wxcroucher@gmail.com


Back to top
View user's profile Send private message
John Ballard
valued contributor


Joined: 11 Feb 2004
Posts: 2412
Location: Dubbo NSW

PostPosted: Tue Sep 03, 2019 4:44 pm    Post subject: Reply with quote

There is a "sticky" here on LCVS under bodywork I have a genuine Minor 1000 LCV workshop manual, I will look later tonight .



_________________
" I still have all my marbles, they just roll slower "
Back to top
View user's profile Send private message Send e-mail
frosty
moderator


Joined: 23 Dec 2003
Posts: 3527
Location: 4559 near a big pineapple, Qld

PostPosted: Tue Sep 03, 2019 5:07 pm    Post subject: Reply with quote

Is this what you are wanting Bill?

click here



_________________
BE Australian, ...BUY Australian (or Kiwi)


~ Will glass coffins ever become popular ?
... Remains to be seen.

Back to top
View user's profile Send private message Visit poster's website
WJC56
Got the keys


Joined: 22 May 2018
Posts: 38
Location: Burrum Heads, Qld

PostPosted: Wed Sep 04, 2019 6:56 am    Post subject: Reply with quote

Thanks Frosty, its a great manual and will certainly be a great help going forward. Though I was hoping for something that shows and explains what the purpose is for all the knobs, etc are for as many were missing or not connected on mine and then there are others under the dash that may have been added later. I look forward to what John turns up. Thanks again. Bill.


Back to top
View user's profile Send private message
frosty
moderator


Joined: 23 Dec 2003
Posts: 3527
Location: 4559 near a big pineapple, Qld

PostPosted: Wed Sep 04, 2019 3:50 pm    Post subject: Reply with quote

Center speedo or in front of driver?

http://mmoc.org.uk/mbimage.php?src=1338672998_8129

From the left: Choke - Ignition switch - Lights - Starter. Top of dash wipers


Center speedo

https://www.flickr.com/photos/12064036@N04/17058431995

From the left: Choke - Wipers - Ignition - Lights - Pull start.
Dash lights slide switch underneath between ignition and lights



_________________
BE Australian, ...BUY Australian (or Kiwi)


~ Will glass coffins ever become popular ?
... Remains to be seen.

Back to top
View user's profile Send private message Visit poster's website
WJC56
Got the keys


Joined: 22 May 2018
Posts: 38
Location: Burrum Heads, Qld

PostPosted: Wed Sep 04, 2019 4:26 pm    Post subject: Dash info.. Reply with quote

Hi Frosty, thanks so much for this. Mine is speedo in front of driver. Looks like the knobs originally had a letter on them. So can you help with the couple of switches under the dash? ALso, there is a light in behind the grill to the right of the ash tray. Thanks again for this info. Bill.


Back to top
View user's profile Send private message
Scouse
moderator


Joined: 15 Sep 2003
Posts: 5195
Location: Wollondilly, NSW

PostPosted: Wed Sep 04, 2019 4:56 pm    Post subject: Reply with quote

You should have 2 lights behind the 'waterfall' grille, one for high beam (usually red), the other to illuminate the ignition key (green).
From new, there was only one switch under the dash, for the aforementioned dash lights.
All but the very first cars had knobs with the letters. Your car should have the brown type although the black's are completely interchangeable (and easier to find).



_________________
Scott
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic    Morris Down Under Forum Forum Index » Electrics, Instrumentation & Security All times are GMT + 10 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001- 2004 phpBB Group
Theme created by phpBBStyles.com | Themes Database